The Ideal Scaffolding for Builders with an Easy Setup that Is Hard to Beat

When you’re on the job, you don’t always have the time or manpower to properly assemble most scaffolding. You may need multiple guys, and while it has its distinct uses, you have other more important things to do to get the job done. The problem is that to cut tails, install fascia board, and even to set trusses, you need that secure scaffolding to protect all of your workers.

Depending on the company, some of your men may or may not have extensive experience in the industry. You don’t want your best guys to waste their time on the small things. So work with Wall Walker, scaffolding that is so simple that one man can do it all on his own. The best part is that you don’t have to have any special training to do it.

There Are 5 Basic Steps to Assemble Wall Walker

1. Adjust the Hooks to the Proper Wall Width: The first thing to do is to take the proper measurements so you can adjust your hook to the appropriate wall width. This will ensure that you have the right foundation to work off of. Before you get started with anything, it is essential to get off to the right start, and this could slow the whole process if it is not done right the first time around.

2. Secure It to the Structure: You should always secure it properly. This is so easy that one man can do it, and we provide all of the necessary tools. However, especially if you are working with a new worker that you have not thoroughly tested, you should always review the process with them. Make sure they know how to secure Wall Walker as the safety of many of your workers depends on it.

3. Secure the Vertical Beam with a Nail: You can also use a stabilizer bar accessory. You don’t have to do much work, and this does not require that you use a complicated system. But your worker does need to understand that this step has to be there to secure the scaffolding.

4. Secure the Plank with Plank Brackets: We will provide the parts you need for this, but it is critical. Always make sure that your workers understand the best ways to secure the plank using the plank brackets provided to them.

5. Install Your Top Rails and Mid Rails with 2x4s: You may also need toe boards. While the foundation of the scaffolding is essential, you need these guard rails to protect your workers from accidental falls. They can happen to just about anybody. You don’t want to make the wrong move.

Wall Walker Is Easy

Scaffolding has never been easier. If you know how to follow the most basic directions, there’s no reason for you not to get safe scaffolding that meets OSHA requirements for an affordable price. You don’t need to bring in specially trained individuals just to put it up for you, nor do you have to waste the time of your most skilled construction workers. Instead, just follow the five simple steps to get the equipment you need.

Leave a Reply

Your email address will not be published. Required fields are marked *